13-24 of 55 results
Analyzing Die-cast Mold Temperatures and Shrinkage Holes
- Posted: June 7, 2024
- Edited: June 23, 2024
- Clicks: 59
Abstract: Aluminum alloy hydraulic valve bodies used in automobile automatic transmissions are prone to air entrapment and shrinkage cavities due to their complex structure, tortuous oil circuits, significant differences...
Die-cast 5G Communication Filter Housings
- Posted: May 26, 2024
- Edited: May 26, 2024
- Clicks: 34
The 5G communication filter is an electronic device used in 5G communication systems to filter and adjust wireless signals. These filters are designed to limit signal transmission...
How to Prevent Mold Sticking?
- Posted: October 30, 2023
- Edited: October 30, 2023
- Clicks: 68
In the past two years, with the development of the die-cast industry, die-cast simulation (commonly known as mold flow analysis) has gradually been widely accepted and applied, and its practical role...
Test Results & Analysis of Properties of ADC12 Aluminum Alloys (Part Two)
- Posted: August 30, 2023
- Edited: August 30, 2023
- Clicks: 131
2.3 Analysis of intermetallic compounds Figure 8 SEM images of intermetallic compounds in the alloy Figure 8 is the SEM image of the intermetallic compound in the alloy. It...
Test Results & Analysis of Properties of ADC12 Aluminum Alloys (Part one)
- Posted: May 27, 2023
- Edited: May 27, 2023
- Clicks: 101
2.1 Analysis of solid-liquid interval determination and phase The DTA curve of ADC12 aluminum alloy is shown in Figure 4. A red area can be observed, which is the endothermic peak, that is, the Al-Si...
Applications of Aluminum Alloy to Commercial Vehicles
- Posted: April 13, 2023
- Edited: April 13, 2023
- Clicks: 44
A new wave of industrial transformation and technological revolution is sweeping the world. New materials and technologies in the automotive industry are widely used, and new models and new formats are...
Effect of Rheological Die Casting on Properties of ADC12 Aluminum Alloys
- Posted: March 30, 2023
- Edited: March 30, 2023
- Clicks: 41
The high-pressure die-cast process is widely used in the production of parts in the fields of automobiles, electronics, and aerospace. Compared with the traditional casting process, it has the characteristics...
Research on Anti-corrosion of Aluminum Alloy Automobiles
- Posted: January 30, 2023
- Edited: January 30, 2023
- Clicks: 38
1.1 Anodizing According to the experiment, after the aluminum alloy is put into a container filled with an electrolyte solution, the aluminum alloy can be anodized when the power is on. A layer of protective...
Advantages of Automotive Aluminum Alloy Parts
- Posted: January 17, 2023
- Edited: January 17, 2023
- Clicks: 44
The industrialization of automobiles has accelerated the development of China’s economy, but we are also facing issues of severe environmental protection and energy conservation and emission reduction....
Die Casting News
- Posted: May 16, 2022
- Edited: May 16, 2022
- Clicks: 82
1. Weilai successfully developed large-scale die casting materials without heat treatment. On October 18, 2021, Weilai announced that it has successfully developed a material without heat treatment which...
Design and Optimization of Semi-solid Die-cast Router Covers
- Posted: April 23, 2022
- Edited: April 23, 2022
- Clicks: 40
Zhizhu Chaoyun is a professional CAE cloud platform in the die casting field, which is used to numerically simulate the die casting filling process of the aluminum alloy router cover, and the process...
Improving Gas Holes of Die-cast Filter Parts by CAE
- Posted: January 14, 2022
- Edited: January 14, 2022
- Clicks: 30
The development trend of lightweight and functional integration of aluminum alloy die castings has led to the diversification and complexity of the structure of the parts, and there are many parts...
Contact