36-40 of 49 results
Methods of Preventing Oxidized Slag Inclusions
- Posted: May 20, 2021
- Edited: May 20, 2021
- Clicks: 112
Methods to prevent oxidized slag inclusions are as follows: 1. Repour molten metal from the riser. Improve the design of the riser. 2. The furnace charge should be clean and non-corrosive....
Defect Analyses and Improvement Strategies of Aluminum Alloy Die Castings (Part Two)
- Posted: March 24, 2021
- Edited: March 24, 2021
- Clicks: 81
2.2.2 Improvement measures for shrinkage cavities In order to eliminate the shrinkage cavity of aluminum alloy die casting parts, the wall thickness of the shrinkage cavity's position...
Defect Analyses and Improvement Strategies of Aluminum Alloy Die Castings (Part One)
- Posted: February 27, 2021
- Edited: March 8, 2021
- Clicks: 112
Abstract: Cast aluminum alloy is one of the important parts of traditional metal materials. The rapid development of modern industrial manufacturing has put forward higher requirements for the quality...
The Effect of the Pouring Process on Reducing Casting Defects
- Posted: February 22, 2021
- Edited: February 22, 2021
- Clicks: 61
There are many types of casting defects, and the factors that affect quality of castings exist in each process of the casting production, as shown in the chart 1. Large castings are characterized...
Prospects for Lightweight Structural Materials (Part Two)
- Posted: January 26, 2021
- Edited: January 26, 2021
- Clicks: 47
2.2 Magnesium alloys At present, the average amount of magnesium used in the automotive industry is less than 10kg. Since 2000, governments and R&D institutions of various countries have invested...
Contact