Industry News
Die-cast Mold Design for New Energy Vehicle Motor Housings (Part one)
- Posted: 12/16/2022 16:50:57
- Edited: 12/16/2022 17:32:14
- Clicks: 3
Abstract: The mold cooling system combined with a 3D printing water channel and high-pressure cooling is used to realize the uniform cooling of the electric vehicle motor housing mold, and the sensor...
Rear Subframes Made by Integrated Die Casting
- Posted: 11/30/2022 20:59:12
- Edited: 11/30/2022 21:18:09
- Clicks: 5
The "2022 European Best Aluminum Die-cast Award Results" were announced, among which the "one-piece die-cast rear subframe" made by the German Hantmann company using die-cast technology...
Measures of Leakages of Aluminum Die Castings (Part Two)
- Posted: 10/23/2022 09:13:57
- Edited: 10/23/2022 09:21:59
- Clicks: 8
2.2 Optimizing the structure of the mold or product After processing a cylinder block, it is found that there are large shrinkage holes in the bolt holes near the water channel (Figure 3). At the...
Measures of Leakages of Aluminum Die Castings (Part One)
- Posted: 10/13/2022 09:18:39
- Edited: 10/13/2022 09:37:01
- Clicks: 5
From the aspects of the structure of die-cast molds, analysis of mold flows and production process, the measures for leakages caused by common defects such as shrinkage cavities and damage to surfaces...
Volvo Cars Plans to Build a New Electric Vehicle Factory in Slovakia
- Posted: 09/24/2022 15:10:27
- Edited: 09/24/2022 15:19:30
- Clicks: 4
Volvo Cars said on July 1 that it will invest 1.2 billion euros ($1.25 billion) in a new dedicated plant for electric vehicles in Kosice in eastern Slovakia to meet the growing demand for electric vehicles...
News
Contact
Latest News
Technical Articles
-
How to Prevent Mold Sticking?10 30, 2023
Useful Links
Copyright © 2014-2024 China Topper Die Casting Company Limited. All Rights Reserved. Privacy Policy | Terms of Service | Sitemap
Links: Die Casting, Linear Robot Arm for Die Casting Machine.
Website Design & Support: jeawin.com